Home Electrification: DIY Pre-requisites

Intro

As a homeowner, having a basic understanding of electrification is important to ensure the safety, functionality, and efficiency of your home’s electrical system. While it’s advisable to consult with licensed electricians for major electrical work, this article lists some key things you should know about electrification to ensure it’s done properly. Our friends at Bel Air Gutter and Siding gave us some advice along with some other contractors.

1. Electrical Safety:

  • Always prioritize safety when dealing with electricity. Never attempt electrical work if you’re not familiar with it.
  • Turn off the power at the circuit breaker before working on electrical outlets, switches, or fixtures.
  • Use appropriate personal protective equipment (PPE) when working with electricity.

2. Electrical Codes and Regulations:

  • Familiarize yourself with local electrical codes and regulations. They are in place to ensure safe and proper electrical installations.
  • Electrical work often requires permits and inspections. Make sure to follow the necessary legal requirements.

3. Hiring Qualified Professionals:

  • For any significant electrical work, hire licensed and experienced electricians.
  • Check references, reviews, and credentials of electricians before hiring them.

4. Understanding Your Electrical Panel:

  • Know the location of your main electrical panel and how to shut off power in case of emergencies.
  • Understand the purpose of circuit breakers and how to reset them.

5. Outlets and Wiring:

  • Learn about the types of electrical outlets in your home (standard, GFCI, AFCI) and their functions.
  • Understand the basics of electrical wiring, such as hot, neutral, and ground wires.

6. Overloading Circuits:

  • Understand the concept of electrical load and avoid overloading circuits by plugging too many devices into a single outlet or circuit.
  • Use power strips with built-in circuit breakers to prevent overload.

7. Extension Cords:

  • Use extension cords only for temporary solutions, not as a permanent source of power.
  • Ensure that extension cords are rated for the intended use and not damaged.

8. GFCI and AFCI Protection:

  • Know the importance of Ground Fault Circuit Interrupter (GFCI) outlets in areas prone to water exposure and Arc Fault Circuit Interrupter (AFCI) protection for preventing electrical fires.

9. Outdoor Wiring:

  • If you have outdoor outlets, ensure they are weatherproof and have proper covers.
  • Use outdoor-rated extension cords and equipment for outdoor use.

10. Light Bulbs:

  • Use the appropriate wattage light bulbs for fixtures to prevent overheating and fire hazards.

11. Energy Efficiency:

  • Consider energy-efficient lighting and appliances to reduce energy consumption and lower utility bills.

12. Signs of Electrical Problems:

  • Be aware of signs of electrical issues such as flickering lights, tripped breakers, burning odors, or sparking outlets. Address these problems promptly.

13. Grounding:

  • Understand the importance of grounding in preventing electrical shocks and ensuring the safety of your electrical system.

14. DIY Limitations:

  • Know your limitations when it comes to DIY electrical work. Simple tasks like changing light fixtures or outlets may be manageable, but more complex work should be left to professionals.

Summary

Remember that electricity can be dangerous if not handled correctly. If you’re unsure about any aspect of electrification, it’s best to consult with a licensed electrician. Staying informed and proactive about your home’s electrical system will help ensure the safety and functionality of your living space.

Why You Need to Work with a Tree Service Company

Are you struggling with issues with trees in your backyard or lawn? If you have a large tree that you want to take down, a diseased tree you want to revive, or just want some professional landscaping services, you can hardly do this on your own. If you want to get the job done, it is in your best interest to work with experts at a Tree Service Company.

Comprehensive Diagnosis Evaluation

Oftentimes, you only see issues with your trees on the exterior. However, lots of tree conditions happen on the inside. Once you see the external manifestations, it may be too late for the trees already. This is why you need trained tree doctors to take a look.

Sometimes, you will observe visible pests or fungus growing on your trees. Then, your instinct would be to handle it yourself. What you might not know is that your trees already have an existing disease that requires professional help.

Tree doctors are trained to have a clinical eye so they can spot any problems not visible to normal people’s eyes. They also aim to diagnose your trees as a whole, not only address the problems you’re complaining about.

Trained and Professional Services

When you’re hiring a Tree Service Company, you’re working with tree professionals or arborists, climbers, and grinders to address any of your needs and concerns. These people are trained and licensed to do what they do. Thus, you can take comfort that your trees are in good hands.

From tree removal, pruning, trimming, fertilization, transplanting, to tree safety solutions like tree bracing, cabling, and lightning protection, they can deliver the services you require. Moreover, they do it professionally so you don’t have to worry about poor service.

  • Emergency Tree Services
  • Professional Tree Removal
  • Stump Grinding
  • Lot and Land Clearing
  • Lawn Care Services
  • Landscaping

Hassle-Free Experience

When you’re paying good money for a service, you want it to be as hassle-free as possible. When you’re working with a Tree Service Company in Annapolis, all you need to do is to let them do the job. You can sit back and relax knowing everything will be taken care of. After all, that’s the service you’ve asked and are paying for.

There’s no need for you to get your hands dirty or get involved in the process if you don’t want to. Tree experts from the tree service company take care of the problem and find the best solutions for any of your professional tree needs.

Services for All Your Tree Needs

Tree service providers like Tree Services Annapolis will cater to all your tree needs. From tree care, removal, trimming, pruning, and injections, to landscaping and lawn care, they can take care of it. Their team is composed of leading experts in the field. They offer free instant quotes on any services you might want to avail of. Just give them a call or reach out to them over at their website.

Renovating for Rental Income

A few years ago, or maybe just recently, you have decided to buy property to be rented out. It was – and is still – a good decision. Renting your property out provides you with passive income. You can better feel the effects of this passive income if you have your finances in order.

Is Rental Income Purely Passive Income?

In a sense, you had all the work done before you were able to invest in property. For those who had finished paying the property in cash, it is time to get some of your money back. However, remember that you are responsible for what happens in the property. It should continue serving as promised – as a haven with the necessary items to keep your tenants comfortable. You need to put in hard work, in terms of maintaining, renovating, and providing your tenants with appropriate furnishings and appliances. You are expected to keep your end of the bargain. So, rental income is mostly passive, but you need to work hard to ensure that your rental property is still serving its purpose.

Why Should You Renovate?

You should renovate the property because of the following reasons:

  • The property is becoming a health hazard and may pose some danger to your tenants.
  • The property is depreciating because of uncontrolled decay.
  • The renovation will improve the value of your property.

What Are the Possible Renovations?

Kitchen Furniture
A rental property must have all the necessary items to keep the tenants comfortable

Some parts of the property need to be renovated the most:

Kitchen

The kitchen can feel a lot of the wear and tear in a house, especially if you are renting out to a family. There may be tenants who like to cook. So, this area may be well-used. You may also make sure that this area is adequately ventilated if it is not yet.

Add or Fix Appliances

If your rental property is furnished, make sure you fix broken appliances. If you need to replace some of them, take advantage of used appliances stores. Do make sure that your contract explicitly indicates what must be done if your tenants were the ones who damaged the appliances. For some great used appliances in the Washington DC area, check out PG Used Appliances. For the same price as new, you can get used or scratch and dent appliances that are higher quality.

Bathroom

Bathrooms are well-used, as well. They are also often the most expensive investments in the house. Make sure all the pipes are working well. Check for rusty parts.

Modern Bathroom
A renovated or well maintained bathroom is key to good rental prospects

What Else Can Be Done?

Install New Floors

If the business is doing well, you can consider adding a few floors to accommodate more tenants.

Repaint and Update

You don’t want your property looking chipped, peeled, and miserable. Make sure there is a regular repaint to freshen its look.

Add Amenities

If there are amenities that are trending in rental property, you have to make sure you have them, as well. This will attract more tenants.

You may think that renovating your rental property is counterproductive, but it is not. You need to regularly update and maintain your property to ensure that your investment does not go down the drain. Properties can get old and damaged fast if not appropriately managed.

Waterproofing Your Basement – The Best DIY Guide

Unfortunately, too many people have issues with moisture in their basements and need information on waterproofing their basements. Since you are here, this means you are probably having issues as well and now you are considering how to waterproof your basement walls.

So, how would you go about the whole process? Follow these tips and keep your basement warm and dry all year round.

Find Out the Water Source

Due to concrete’s porous nature, you might easily be able to find wet streaks along cracks, between the mortar joints (assuming you have concrete block walls), at the corners of the windows, and around the pipes (e.g., sewer pipes or a water supply line).

basement

But if the whole surface of the wall is wet, you will have to do a condensation test. First dry any area of the wall using a rag and attach a piece of aluminum foil (one-foot square) to that area with duct tape.  After 24 hours, peel off the aluminum foil and see how the bottom of the foil feels. If wet, water must be seeping through your basement wall from outside.

Use Hydraulic Cement to Fill Cracks

Cracks are often found at the bottom of basement walls where the wall meets the footing. The footing of the foundation is poured first and then either a cement wall is poured on top once the footing hardens or a concrete block wall is laid on the footing. Because it is two separate pieces, leaks can happen at that joint between the wall and the footing.

This construction method could create a weak spot – known as a cold joint – that you can fill with hydraulic cement. We are recommending hydraulic cement because it has the ability to push deep into the crack or crevice and form an effective watertight bond by expanding.

Keep Window Well Leaks in Mind

Window wells are often the culprit behind a basement wall leak because they could retain water in case there is no drainage system installed underneath. If you think installing a proper window well drainage system is not possible, dig around two feet lower in the area and fill it with gravel so rainwater cannot stand in the area.

Now get a caulk used on masonry and apply it around the window. You could also purchase a sloped window well cover and install it to keep rainwater at bay. 

Apply Masonry Waterproof Coating to Bare Interior Basement Walls

What if the foil test showed that the water was soaking through the basement walls? In such a scenario, you will need a quality waterproof paint to seal the walls. Roll or brush the paint on and keep it thick enough to fill the tiny surface holes. Then let it completely dry before you apply second coating.

Follow Other Procedures to Keep Your Basement Free from Water

It is sometimes easy to tackle wet basements. A really important thing is to make sure that the ground is sloped to lead water away from the house. That may mean you need to do some grading, but that can be much cheaper than having to dig around your house to put a coating on the exterior of your basement walls. Also pay attention to the foundation plantings like flowerbeds and bushes that could allow water to seep in your basement. Also, repair downspouts and guttering to make sure they are effectively directing water away from your house. As you can see, waterproofing a basement is not supposed to be a costly procedure. You can go DIY with these tips and avoid hiring a professional to do the same for you.

When Do I Need a New Roof?

While the roof is essentially one of the most critical components of a house, it’s often the most neglected one. Many a time, we realize that our roof has problems only after we see visible water leakage.

This article provides some tips to tell if you might need a roof replacement.

Roof inspection needed to determine if need a new roof
This roof has issues

A responsible homeowner should routinely self-inspect the roof from the outside as well as inside. By proactively identifying existing and potential issues, one can have those fixed in a timely fashion. This saves money because less water damage is caused if you repair a roof earlier rather than later.

Age of the Roof

Most experts agree that the average age of an asphalt shingle roof is between 20 and 25 years. If your roof is that old, it’s time to get it professionally examined.

If your neighbors have started to get their roofs replaced and most of the houses in your locality have been built by the same builder or around the same time, you should also consider getting a professional roof inspection done.

Water Leakage Through the Roof

If you see any of the following while looking at the underside, your roof is allowing water to get through:

  • Streams of sunlight coming through the roof in the attic
  • Dark spots or stains caused by moisture on the underside of your roof or walls next to the roof base
  • Sagging spots on the underside of your roof that feel soft when prodded with a hard object
  • Other signs of damage caused by water, e.g. rotting wood or rusting metal

If this is the case, your roof needs an immediate and thorough inspection from a licensed roofer with a good reputation.

Condition of the Shingles

If you observe one or more of the following upon a close inspection of the roof shingles, you need to get in touch with a professional roofer:

  • Shingles are missing altogether
  • Shingles are not lying flat against the roof surface
  • Shingles are cracked
  • Shingles look worn out or have algae/moss deposited on them
  • Shingles show visible signs of missing granules

The extent to which the shingles have gotten affected will be a factor in deciding whether the roof needs a complete replacement or just repairs.

Condition of the Flashing

Weak flashing around the chimney and vents protruding through the roof is another source of water seepage that can cause structural damage to the roof. The use of cement or tar in a flashing is often not watertight. Even a good quality metal flashing can loosen over time. The flashings are areas worth assessing periodically for their effectiveness. If the damage due to ineffective flashings is deemed to be structural, you might need to consider replacing the roof. If you inspect regularly and catch this soon enough you only need to repair the flashing. So don’t wait before you have to replace or do a major repair on the roof.

Condition of the Layering Underneath the Shingles

In roofs with double layering, the problem may sometimes lie in the secondary waterproofing layering just underneath the shingles. This may be hard to identify by just inspecting the exterior and interior of the roof. Experts recommend getting this layering checked at strategic points during your periodic roof inspections by a professional.

Conclusion

Deciding whether your roof needs just repair, or replacement is often not straightforward and is better left to an expert. However, as a homeowner, if you’re aware of the factors that can lead to either, you’ll be able to identify them at the earliest and approach a professional for remedy.

While thinking about roofing, you might also want to think about insulation. Check out our post here for more info.

How to Plan an Addition on a Home

It’s a well-known fact that requirements related to configuration and space in a home keep changing with times. Children growing up, parents coming to live with you, need of a home office, etc. are only some from a long list of reasons that might necessitate getting a home remodeled.

So, what are the considerations you need to make when planning an addition on your home? We’ll try and provide some of the answers.

Know the local construction and expansion regulations

As a first step, it’s important to know what you are allowed to do in relation to the remodeling or expansion of your house. Do you need a permit? What line considerations need to be made? Are there any restrictions on the number of stories or certain styles of architecture? Understand those laws and regulations, or better, consult a professional to know about them.

Arrive at a practical plan

You must start with establishing that the addition you are planning is an absolute must. Consider every detail that can have an impact. For example, whether you’re going to live in the house while the construction is taking place? Are there older folks with limited mobility or toddlers and small children who’ll access the space? If it’s a home office, are there going to be visitors? Et cetera.

Follow that by chalking out a practical design in consultation with an architect. A design that fits in with the architecture and décor of rest of your house.

Allocate a budget

A study by a website shows that a home addition in the USA can range between $10,000 and $1,500,000. The average cost per addition, without considering the magnitude, is to the tune of $42,000.

Work out the costs carefully and plan for where they will be sourced from. Consider all the hidden costs such as the architectural plans and designs, permit fees and design approval fees.

Double-check that your budget and design are in-line with each other.

Select a remodeling contractor

Approach contractors with good reputation for quotations to develop based on your design. As they’ll all be bidding from identical set of inputs, you’ll be able to better gauge their experience, quality of workmanship and price. Evaluate the bids carefully and finalize the remodeling contractor.

Keep the architect involved for consultation throughout the construction stage.

Conclusion

There are endless ways in which a home addition can be done. If you are clear about why you need the addition and have the requisite monetary resources, there is no reason why you shouldn’t get that done. With careful planning and execution, you can have that extra space in your home for optimal usage.

And don’t forget about insulation. See our post.

Issues with Insulation

There are different types of insulation and different ways to install the insulation. Also, there are different places you should insulate.

If you use your attic for storage and have the floors covered in plywood, that is a problem. That is because the flooring limits the amount of insulation you can put in the attic. So you might need to take up the plywood and find someplace else for what you are storing.

Types of Insulation

The two most common types of insulation are loose fill and batts, also known as blanket type. Most people are familiar with these two types but few are aware of radiant barrier foil insulation. This foil type insulation uses different properties than traditional insulation to provide insulation.

Loose fill Insulation

In some cases this is spread around by hand, but typically it is blown in with a machine. There are certain situations where it makes more sense to use this type:

  • When there are areas that are hard to get to because of obstructions, etc.
  • When the joists are not the standard width
  • When you are adding insulation on top of existing insulation because it will fill in any gaps
  • When there is little headroom to work in

Loose fill can be of three types, fiberglass, cellulose or mineral wool. Fiberglass is lighter but you need more of it. Cellulose is common but if it gets damp, it can rot. The mineral wool costs a bit more but has natural fire resistance since it is made from rock or slag fibers.

Batt Insulation

You may remember seeing ads for this with the Pink Panther. The reason is that it comes in rolls 16″ or 24″ wide with pink fiberglass attached to paper and foil backing. In addition, it comes in different thicknesses which have different R values. An R value is a measure of insulation effectiveness.

It is best to use this in the opposite situation of the blown-in loose insulation. In other words, when the joist spacing is standard, there is easy access to the attic space, and there is enough headroom.

Radiant Barrier Solar Attic Foil

Heat is transmitted by conduction, convection or radiation. Infrared radiation heats up the roof of your house. Then through convection and conduction the air in your attic heats up which then transmits the heat down into your house.

Regular insulation works by having lots of little air pockets and reducing air movement so convection has less of an impact. But if it gets hot, it can still transmit heat by convection. So, what to do? You can take care of the problem by using a radiant foil barrier. It is basically a large sheet of aluminum foil with thousands of little holes in it so it won’t trap moisture. Aluminum reflects 97% of radiant heat. Only silver and gold foil reflect more at 98 and 99%.

By putting the foil insulation on top of the other insulation most of the radiant heat reflects back into the attic. The top of the regular insulation is 20-30 degrees cooler that it would be without the foil. That means less heat transfers into the house and you don’t have to run the air conditioning nearly as often.

You can think about the difference on a hot day when the sun is out. If you stand in the sun, you can feel the radiant heat. If you stand in the shade, even though the temperature is the same, you feel cooler because you are only being heated by convection from the air and not radiant heat from the sun as well.

Wall Insulation

If you are building a home or completely remodeling and have taken down the interior walls, you can staple batts of insulation in between the joists. Otherwise, you will have to blow in the insulation.

If you have an older house, you might want to check to see if you have any insulation in the walls. Energy used to be so cheap that people didn’t bother with insulation. If you have to add insulation, it is not a fun project.

You have to cut a circular hole near the ceiling and one near the floor. You need two holes because the pressure of blowing in the insulation could blow out the wallboard if you didn’t have a place for air to get out.

The bad part is that you have to cut the two holes every 16 inches in the walls around the outside of your house on all floors. The reason is that the studs, which are every 16 inches, keep the insulation from going sideways, just up and down in that narrow area. Then you have to take the circles of wallboard and plaster them back in place and then repaint all the walls. Not a cheap process, but usually worth it for the extra insulation and lower heating bills.

For more useful information, click here.

Hello Homeowners and Purchasers!

The crane on top of the building is a bit over the top. We doubt you will be using something like that unless you are a multi-millionaire and building a building with a penthouse on top for yourself. But, we thought it was a fun photo.

We plan to give you tips that will help you in any building projects you might have. We also plan to give you some ideas you can use or warn you away from mistakes.

Are you remodeling a kitchen, a bathroom? Perhaps adding a deck? Or are you going full out and adding an addition to your house? If any of those are true, we hope to be able to help you with your endeavors.